lp industrial

Flow Industries - Keeping it Flowing Logo

A New &
Effective Solution

your toughest clogging or
build-ups problems

Save air, energy and money with the extremely powerful industrial air blaster


Industrial air cannon unprecedented innovation

Bring unprecedented innovation to the cement, power and chemical production with rapid return on investment.

Silo-Flow Device

The industrial air blaster that saves you money

AirMace industrial air cannon valve technology provides unprecedented air savings delivering the highest pressure peak and the same amount of work with savings of up to 40% of compressed air. Saves approx $1,000 per blaster per year due to lower air consumption plus annual saving on the compressor maintenance

Higher Pressure

The only industrial air cannon on the market able to work at pressures from 60 to 600 PSI. Built-in booster doubles the plant pressure without a dedicated compressor

Highly effective with minimum maintenance

Highly effective for solving material flow problems in any part of the production or storage process. Maintenance couldn’t be easier and cheaper. Unprecedented 3 years of warranty

Air-water blast

The only industrial air cannon on the market capable of combining an air blast of high pressure with a portion of water. Water injection into the air blast enhances the cleaning the effect immeasurably thanks to much better energy transfer by water drops than air molecules

AirMace: breaking the air cannon paradigm

AirMace cannon features in its unique spring-free one moving part design and in additional parameters that can be adjusted to provide maximum force air blast with minimal air consumption and reach the best buildup prevention result whatever it is storage or process vessel, riser duct, kiln entrance, cooler or boiler.

What our customers say

“I Just wanted to let you know that we had a very large snowman this morning, turned on the ‘big gun’ and collapsed him in about 5 minutes. We haven’t used a high pressure water blaster since having your system.”
Josh FredlakeProduction Manager, Giant Cement, SC, USA
We got incredible results with AirShock. We increased the specific flow for about 400%. The client is very happy.
They where pumping 30 lps @ 70m. At the end of the pumping test we were pumping 74 lps @ 42m
Michael SchuttProduction Manager, Lehigh Cement, Alabama, USA
Our main objective was to increase the production process predictability and we got this all right, but as a big bonus we got huge savings with the move to 100% synthetic gypsum. We paid back the investment in no time.
air ItzhakGeneral Manager, Nesher Cement, Israel
I am pleased, not only with the results we have achieved with AirShock, but how easy it is to setup and apply.
Three wells were returned to 90+% of original capacity and one, a sandstone well, came back to 141% of original. The two relief wells in the St. Louis District responded favorably with gains of 12 and 81% over previous treatments with modest amounts of chemicals and without damage to the PVC casing, which was a major concern.

Roger D. Miller
Technical Director, Layne Christensen, Inc., USA
We got incredible results with AirShock. We increased the specific flow for about 400%. The client is very happy.
They where pumping 30 lps @ 70m. At the end of the pumping test we were pumping 74 lps @ 42m

Jerónimo von Wuthenau Mayer
Mtro. Ing, Equipozo, Mexico
This new well had a lot of silt in suspension, we were actually trying to break and loose a bridge that formed in the gravel pack during gravel pack installation. The bridge prevented the gravel from covering the screens. Everything we tried did not work and we were running out of options.
10 min of AirShocking was enough for the bridge to break, gravel is now entering the well; we are very happy. AirShock made in 10 min what traditional technics like jetting, surging and airlift could not do in 10 days, very impressive.
Thank you for developing such a good tool.

Mauricio Solis
Owner, HIDRO DRILL, Bolivia
Running AirShock as pre-fracturing and post-fracturing procedures. Results with and without AirShock are as different as day and night. With AirShock I am getting fantastic results

Chuck Claverack
Owner, Claverack Pump Service, NY, USA

Get job done better, faster and cheaper

contact us today